<?xml version="1.0" encoding="gbk"?>
<rss version="2.0">
  <channel>
    <title>中国振动联盟 - 流体力学及其软件应用</title>
    <link>http://www.chinavib.com/forum.php?mod=forumdisplay&amp;fid=44</link>
    <description>Latest 20 threads of 流体力学及其软件应用</description>
    <copyright>Copyright(C) 中国振动联盟</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Fri, 18 May 2012 04:20:49 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>http://www.chinavib.com/static/image/common/logo_88_31.gif</url>
      <title>中国振动联盟</title>
      <link>http://www.chinavib.com/</link>
    </image>
    <item>
      <title>H网格是什么样的拓扑结构？</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=111909</link>
      <description><![CDATA[这两天在看一些文章，贴体网格里可以分为O-grid，C-grid和H-grid，O-grid和C-grid接触过，也用过，但是H-grid不知道是个什么样子的拓扑结构，请知道的朋友们指点一下？]]></description>
      <category>流体力学及其软件应用</category>
      <author>mobei</author>
      <pubDate>Tue, 15 May 2012 00:42:18 +0000</pubDate>
    </item>
    <item>
      <title>求助，动网格泥沙模拟中，关于UDF编写一个差分方程的问题</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=111890</link>
      <description><![CDATA[想通过n时刻二个节点（i+1,i,)位置X坐标的运算，得出n+1时刻i节点坐标



1.通过begin_f_loop,和，f_node_loop,得到n时刻，i的坐标，如下，



begin_f_loop (f, tf)
{
f_node_loop (f, tf, n)
{
v = F_NODE (f, tf, n);



如何
同时得到与它相邻的节 ...]]></description>
      <category>流体力学及其软件应用</category>
      <author>youngyoung0917</author>
      <pubDate>Mon, 14 May 2012 06:31:01 +0000</pubDate>
    </item>
    <item>
      <title>离心风机气动噪声分析</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=111868</link>
      <description><![CDATA[]]></description>
      <category>流体力学及其软件应用</category>
      <author>danielwang690</author>
      <pubDate>Sun, 13 May 2012 13:48:50 +0000</pubDate>
    </item>
    <item>
      <title>DPM计算结果(Fluent)，怎样显示粒子在不同区域的含量？</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=111781</link>
      <description><![CDATA[采用Fluent的离散相模式(DPM)进行计算，是三维的，流场是定常的，离散相是瞬时的，且采用双相耦合，计算结束后，用什么方法能得到粒子在不同区域的含量（质量或数量百分率）？

另外，怎样得到粒子在某一截面上的分布云图呢？谢谢]]></description>
      <category>流体力学及其软件应用</category>
      <author>guohf</author>
      <pubDate>Fri, 11 May 2012 02:52:05 +0000</pubDate>
    </item>
    <item>
      <title>virtual lab计算水下的流固耦合中使用的是湿模态吗？</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=111722</link>
      <description><![CDATA[最近在做水下结果的流激噪声
在计算流固耦合的时候，导入的ansys计算的干模态。
在计算vibro-acoustic的时候出错。我想是不是这用的是湿模态啊。

如果是的话，ansys是可以得到的，但是如何提取结构的湿模态又是个问题。
请问这类似的问题的解决思路，谢谢了。]]></description>
      <category>流体力学及其软件应用</category>
      <author>yuanweizhao</author>
      <pubDate>Wed, 09 May 2012 13:47:19 +0000</pubDate>
    </item>
    <item>
      <title>请问谁有dpm模型完整算例</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=111644</link>
      <description><![CDATA[哪位大侠有dpm算例的完整模型，谁能发给我一份啊，我的邮箱1064682069@qq.com,不胜感激！]]></description>
      <category>流体力学及其软件应用</category>
      <author>adsasd</author>
      <pubDate>Tue, 08 May 2012 02:14:14 +0000</pubDate>
    </item>
    <item>
      <title>求助ANSYS+CFX的流固耦合问题</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=111603</link>
      <description><![CDATA[大家好，我现在正在做流体冲击管束振动的模拟。我用的是ANSYS Workbench+CFX来进行的流固耦合模拟。最近总是出错，CFX总是不能产生结果文件，错误提示总是网格出现错误。我不知道关于流固耦合在划分网格的时候，流体网格和固体网格要注意些什么。我不会解决，希望能够得 ...]]></description>
      <category>流体力学及其软件应用</category>
      <author>草圣</author>
      <pubDate>Mon, 07 May 2012 02:37:25 +0000</pubDate>
    </item>
    <item>
      <title>VL中使用Vibro-Acoustic Response Analysis Case计算出错</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=111473</link>
      <description><![CDATA[VL中使用Vibro-Acoustic Response Analysis Case计算出错，如上所示。

我的模型是用流场在结构表面的压力分布作为激励，来计算流固耦合。
思路是先将流场时域数据转移到固体结构表面；计算激励的DSP，得到互功率谱；
采用CPA来得到主要的激励形式，选了9阶；连 ...]]></description>
      <category>流体力学及其软件应用</category>
      <author>yuanweizhao</author>
      <pubDate>Wed, 02 May 2012 15:09:46 +0000</pubDate>
    </item>
    <item>
      <title>求助：一个周期内力矩的平均值如何求解？</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=111247</link>
      <description><![CDATA[最近在做风力机的数值模拟，采用非稳态，用Minitor监视力矩系数的变化并得到一个txt文件，是一系列不同时刻的力矩系数，通过公式可以转换成不同时刻的力矩，那么如何求得一个周期内的平均值呢？看到有个帖子里提到，可以将保存下来的数据导入origin里，可以对随时间变化 ...]]></description>
      <category>流体力学及其软件应用</category>
      <author>mobei</author>
      <pubDate>Wed, 25 Apr 2012 02:34:49 +0000</pubDate>
    </item>
    <item>
      <title>fluent中Grid Interface</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=111173</link>
      <description><![CDATA[在gambit中已经设置了interface，在fluent中如何用Grid Interface功能将他们连接呢]]></description>
      <category>流体力学及其软件应用</category>
      <author>无名5673</author>
      <pubDate>Mon, 23 Apr 2012 04:18:05 +0000</pubDate>
    </item>
    <item>
      <title>一个铝块冷却的非稳态导热问题</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=111143</link>
      <description><![CDATA[请问各位同学：
把一个热的铝块（不能产热只是有初始温度）放在空气中自然冷却，怎样用fluent模拟？
我的思路如下：
将铝块放在一空气中，铝块和空气都划分网格，通过对流换热和辐射换热
用流固耦合传热来分析
但是遇到几个问题
1这是一个非稳态问题，铝块整体的 ...]]></description>
      <category>流体力学及其软件应用</category>
      <author>xxxjjjc</author>
      <pubDate>Sun, 22 Apr 2012 10:34:03 +0000</pubDate>
    </item>
    <item>
      <title>cfx  出口压力 设置问题</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=111141</link>
      <description><![CDATA[我现在计算的模型是一个管道，进口边界条件是速度，出口边界设置的是outlet，边界条件是压力，
 但是由于压力过大（几十个大气压），在计算过程中总是提醒outlet要改成opening，
 而且我在用大涡模型计算的过程中，算到3000多步就出错，错误如下
 ERROR #001100279 h ...]]></description>
      <category>流体力学及其软件应用</category>
      <author>yunhunzhi</author>
      <pubDate>Sun, 22 Apr 2012 06:21:18 +0000</pubDate>
    </item>
    <item>
      <title>求助Gambit如何利用一个面旋转成一个体</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=111055</link>
      <description><![CDATA[RT，求高手指点啊 ！]]></description>
      <category>流体力学及其软件应用</category>
      <author>MUTD</author>
      <pubDate>Thu, 19 Apr 2012 12:14:01 +0000</pubDate>
    </item>
    <item>
      <title>[求助]virtual lab中如何加压力边界条件？</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=111048</link>
      <description><![CDATA[想利用virtual lab来做流固耦合，边界条件是压力而不是声压。
如何加呢？
是不是在Create a Boundary Condition 中的Physical Data Type下拉菜单中选择acoustic pressure?

还是说在Load Function Set中的Physical Data Type中下拉菜单中Pressure/Stress?
而压力是 ...]]></description>
      <category>流体力学及其软件应用</category>
      <author>yuanweizhao</author>
      <pubDate>Thu, 19 Apr 2012 08:46:46 +0000</pubDate>
    </item>
    <item>
      <title>新手请教Fluent划分区域</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=111020</link>
      <description><![CDATA[]]></description>
      <category>流体力学及其软件应用</category>
      <author>MUTD</author>
<enclosure url="http://www.chinavib.com/data/attachment/forum/201204/18/192434z2toflulltlvqaaq.jpg" length="31847" type="image/jpeg" />      <pubDate>Wed, 18 Apr 2012 11:28:22 +0000</pubDate>
    </item>
    <item>
      <title>流体力学知识详解 广大学者可以交流一下</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=111014</link>
      <description><![CDATA[流体力学，是研究流体(液体和气体)的力学运动规律及其应用的学科。主要研究在各种力的作用下，流体本身的状态，以及流体和固体壁面、流体和流体间、流体与其他运动形态之间的相互作用的力学分支。流体力学是力学的一个重要分支，它主要研究流体本身的静止状态和运动状态 ...]]></description>
      <category>流体力学及其软件应用</category>
      <author>xinzhoutai</author>
      <pubDate>Wed, 18 Apr 2012 08:09:45 +0000</pubDate>
    </item>
    <item>
      <title>请教，咨询空气动力学数值计算</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=110945</link>
      <description><![CDATA[空气动力学软件，求助

想学一个计算软件，主要计算，超音速，亚音速，跨音速的空气动力学计算
及真空问题！

开始写了一大段，居然说我包含XX信息，真是郁闷。谢谢大家，望不吝赐教]]></description>
      <category>流体力学及其软件应用</category>
      <author>smtmobly</author>
      <pubDate>Tue, 17 Apr 2012 02:03:30 +0000</pubDate>
    </item>
    <item>
      <title>udf单核可以计算，单机双核可以compile成功，但是计算出现错误</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=110944</link>
      <description><![CDATA[前面定义这个宏，DEFINE_EXCHANGE_PROPERTY(custom_drag2, cell, mix_thread, s_col, f_col)里面计算k_g_s_1, k_g_s_2，后面想按坐标分段取值，这是我的代码：
#if !RP_HOST                                                   /* 97*/
             begin_c_loop(c, ...]]></description>
      <category>流体力学及其软件应用</category>
      <author>潇叶飞扬</author>
      <pubDate>Tue, 17 Apr 2012 01:58:22 +0000</pubDate>
    </item>
    <item>
      <title>2012 Society for Underwater Technology Technical Conference</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=110878</link>
      <description><![CDATA[我国深海油气资源丰富，为满足日益增长的石油需求，快速发展和提高国内深海油气开采技术尤其是南海油气开采技术的任务迫在眉睫。为引入国外先进深水油气开采技术资源，加强国内深水水下系统的国际交流，推进南海油气田开发，水下技术协会（ Society for Underwater Tech ...]]></description>
      <category>流体力学及其软件应用</category>
      <author>qwclovecj</author>
      <pubDate>Sun, 15 Apr 2012 05:40:36 +0000</pubDate>
    </item>
    <item>
      <title>DPM的问题。。。。</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=110869</link>
      <description><![CDATA[我用DPM模型模拟喷嘴的气固流场。。。。用solid-cone或者surface。。。发现在喷射源处的颗粒浓度总是好高。。。请问这个正常吗？是不是颗粒没有完全打出去啊？]]></description>
      <category>流体力学及其软件应用</category>
      <author>5超7</author>
      <pubDate>Sun, 15 Apr 2012 00:48:08 +0000</pubDate>
    </item>
  </channel>
</rss>
