<?xml version="1.0" encoding="gbk"?>
<rss version="2.0">
  <channel>
    <title>中国振动联盟</title>
    <link>http://www.chinavib.com/forum.php</link>
    <description>Latest 20 threads of all forums</description>
    <copyright>Copyright(C) 中国振动联盟</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Fri, 18 May 2012 04:26:21 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>http://www.chinavib.com/static/image/common/logo_88_31.gif</url>
      <title>中国振动联盟</title>
      <link>http://www.chinavib.com/</link>
    </image>
    <item>
      <title>混沌动力学分岔图，代码有误，求教~</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=112900</link>
      <description><![CDATA[function s=der2(t,y,Z,flag,f);
ylag1=Z(:,1);
s=[493.8*y(2)*(y(1)+1)-1.2*y(1)*(y(1)+1);
1.458*4*f/3*(1+ylag1(1))-1.458*y(2)-0.486*y(1)-y(2)*(y(1)+1)+0.00243*y(1)*(y(1)+1)];
f=0:0.001:0.2;
hold on
for i=1:length(f)
sol=dde23(@der2,[2.7],[-0.1,-0 ...]]></description>
      <category>Matlab讨论区</category>
      <author>antonio1111</author>
      <pubDate>Fri, 18 May 2012 03:29:23 +0000</pubDate>
    </item>
    <item>
      <title>求一疲劳分析的实例</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=112899</link>
      <description><![CDATA[做活塞的疲劳分析，做完耦合分析之后做疲劳分析，应该怎么样做？求指教啊，或者哪位高手有做疲劳分析的实例给小弟发一个，感激不尽]]></description>
      <category>Ansys讨论区</category>
      <author>蓝江口</author>
      <pubDate>Fri, 18 May 2012 03:05:21 +0000</pubDate>
    </item>
    <item>
      <title>混沌在保密通讯中的应用matlab仿真程序</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=112898</link>
      <description><![CDATA[求助：请问谁有混沌在保密通讯中的应用matlab仿真程序，谢谢~~~]]></description>
      <category>数学与非线性科学</category>
      <author>lzjtuliuting</author>
      <pubDate>Fri, 18 May 2012 02:04:57 +0000</pubDate>
    </item>
    <item>
      <title>ansys弹簧静力分析</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=112897</link>
      <description><![CDATA[ansys弹簧静力分析，哪位大虾会？给个程序呗]]></description>
      <category>Ansys讨论区</category>
      <author>peng_weishi</author>
      <pubDate>Fri, 18 May 2012 00:42:55 +0000</pubDate>
    </item>
    <item>
      <title>楼主好人啊，麻烦也发一个给我</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=112896</link>
      <description><![CDATA[楼主好人啊，麻烦也发一个给我]]></description>
      <category>振动实验与测试技术</category>
      <author>gdcj99</author>
      <pubDate>Fri, 18 May 2012 00:09:17 +0000</pubDate>
    </item>
    <item>
      <title>有没有关于混沌动力学方程画分岔图的例子？</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=112892</link>
      <description><![CDATA[我想画一个关于时延的分岔图，有没有这方面的例子？]]></description>
      <category>Matlab讨论区</category>
      <author>antonio1111</author>
      <pubDate>Thu, 17 May 2012 14:21:42 +0000</pubDate>
    </item>
    <item>
      <title>如何测量一根梁的固有频率</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=112827</link>
      <description><![CDATA[本人有一款便携式振动测试仪，可以测时域的加速度、速度、位移值，一起自带FFT功能，可以及时查看。
想用锤击法得到某梁的固有频率
1）锤击力时域信号太短，怎么做频谱呀？可以做吗？
 
请高手指教，谢谢！！！]]></description>
      <category>振动实验与测试技术</category>
      <author>大学</author>
      <pubDate>Thu, 17 May 2012 13:08:04 +0000</pubDate>
    </item>
    <item>
      <title>求助,如何运用matlab解非线性微分方程组和求平衡点坐标</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=112809</link>
      <description><![CDATA[本人一点编成知识没有,看书也看不太明白,所以求助各位大大,模型是
dx/dt=x(1-x)-sxy/(x+y-a)
dy/dt=δy(-r+x/(x+y+ε))-γy
其中 s,a,δ,ε,γ都是参数，编成后想得到解的图形和平衡点的坐标，不知道该如何写，写不明白了。
时间紧迫，希望大大们帮帮忙，感激不尽。 ...]]></description>
      <category>Matlab讨论区</category>
      <author>wstcjacky</author>
      <pubDate>Thu, 17 May 2012 12:58:07 +0000</pubDate>
    </item>
    <item>
      <title>!!求振动试验方面的资料。</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=112609</link>
      <description><![CDATA[因为本人刚刚接触振动试验，很多地方都不懂，不知哪位有这方面的资料，基础一点的，借来参考下，谢谢！]]></description>
      <category>振动实验与测试技术</category>
      <author>SZCLGZQ</author>
      <pubDate>Thu, 17 May 2012 11:34:07 +0000</pubDate>
    </item>
    <item>
      <title>耦合中出现的错误</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=112552</link>
      <description><![CDATA[最近在做预应力分析的时候，出现了一个关于耦合的错误提示，如下图所示。我猜是因为耦合和约束发生冲突，不知道对不对，也不知道怎么能解决。所以请各位进来帮我分析一下，谢谢！]]></description>
      <category>Ansys讨论区</category>
      <author>xiaozhu8745</author>
<enclosure url="http://www.chinavib.com/data/attachment/forum/201205/17/191318gz8giw740228k572.jpg" length="31803" type="image/jpeg" />      <pubDate>Thu, 17 May 2012 11:13:37 +0000</pubDate>
    </item>
    <item>
      <title>ANSYS中如何定义单位制？</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=112384</link>
      <description><![CDATA[ANSYS中如何定义单位制？]]></description>
      <category>Ansys讨论区</category>
      <author>1986</author>
      <pubDate>Thu, 17 May 2012 10:06:12 +0000</pubDate>
    </item>
    <item>
      <title>用TEST.LAB采集的时域数据如何转换为时频曲线</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=112278</link>
      <description><![CDATA[我采用TEST.LAB采集了一段数据，得到了其时域波形，但是我想得到时间和频率的关系曲线，请问怎么做。  要求在test.lab中做。]]></description>
      <category>信号处理方法</category>
      <author>AHARDNUT</author>
      <pubDate>Thu, 17 May 2012 09:25:52 +0000</pubDate>
    </item>
    <item>
      <title>请教关于激振力频率范围对幅值影响的问题</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=112246</link>
      <description><![CDATA[我在adams里做刚柔混合振动分析，mnf文件是在ansys里生成的，但不知道为什么激振力频率范围变化时，幅值也在变化？ansys里幅值好像不会变化。选取的激振力频率范围介于一阶固有频率与二阶固有频率之间。]]></description>
      <category>一般力学和振动理论</category>
      <author>blackberry</author>
      <pubDate>Thu, 17 May 2012 09:13:55 +0000</pubDate>
    </item>
    <item>
      <title>神经网络训练终止的问题~~~~</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=112243</link>
      <description><![CDATA[clear,clc;
global L;%输入的训练样本
global R;
global T;
for i=1:588
W(:,i)=[L(:,i);R(:,i)];
end
%m=length(W)/2
%for j=1:2*m;
%W1=W(:,j);
%end
[Wn,minW,maxW,Tn,minT,maxT] = premnmx(W,T);
m=1:(length(W)/2);
W1=Wn(:,2*m);
T1=Tn(:,2*m);

 ...]]></description>
      <category>Matlab讨论区</category>
      <author>jidaxiaochen</author>
      <pubDate>Thu, 17 May 2012 09:13:16 +0000</pubDate>
    </item>
    <item>
      <title>向各位大虾求助啊</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=112236</link>
      <description><![CDATA[请问各位大虾，我的ansys最近老是会出现，计算没完成就跳出程序的情况，请问是什么原因？很是困惑，谢谢各位大虾！]]></description>
      <category>Ansys讨论区</category>
      <author>810842245</author>
      <pubDate>Thu, 17 May 2012 09:10:49 +0000</pubDate>
    </item>
    <item>
      <title>Patran/Nastran结构受瞬态冲击载荷下的优化设计</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=112203</link>
      <description><![CDATA[在用Patran/Nastran进行结构优化设计时，求解器只能是101或103，即在静载或者模态分析，能不能进行瞬态冲击载荷作用下的结构优化啊，也就是说结构受到的载荷是正弦冲击载荷，能用于Patran/Nastran进行结构优化设计吗？有那位朋友知道的麻烦告知一下，谢谢。]]></description>
      <category>MSC系列软件专区</category>
      <author>alai</author>
      <pubDate>Thu, 17 May 2012 08:59:19 +0000</pubDate>
    </item>
    <item>
      <title>直行仿真事件 (Brake) 仿真错误</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=112170</link>
      <description><![CDATA[The simulation stopped at time = 3.150 .  Adams cannot solve
   the equations of motion.
  
   The greatest error in an equation is 9.39083E+05 in the
   equation for VARIABLE BRA_brake.Gen0_brake.right_rear_brake_torque_VAR .
  
   The greates ...]]></description>
      <category>MSC系列软件专区</category>
      <author>atsb1234</author>
      <pubDate>Thu, 17 May 2012 08:47:56 +0000</pubDate>
    </item>
    <item>
      <title>请教怎么用求解后的结果继续求解</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=112135</link>
      <description><![CDATA[我在做一个关于铜基体拉伸的实验，想在workbench里的到大变形，比如我想把铜块拉成铜丝，由于铜的最大变形量是50%，所以必须分多次拉，这一次后用上一次的拉伸变形结果，就相当于金属变形后在回火，消除变形硬化后再拉伸，直到变形量足够大，刚学，希望各位大神解惑]]></description>
      <category>Ansys讨论区</category>
      <author>qust_qsq</author>
      <pubDate>Thu, 17 May 2012 08:35:06 +0000</pubDate>
    </item>
    <item>
      <title>vl瞬态边界元中边界元网格为何只能是三角形网格</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=112124</link>
      <description><![CDATA[求教，为何vl中瞬态边界元中边界元网格只能是三角形网格，原因是什么？]]></description>
      <category>声学基础及其分析软件</category>
      <author>yaoyaomao</author>
      <pubDate>Thu, 17 May 2012 08:30:31 +0000</pubDate>
    </item>
    <item>
      <title>我是菜鸟，lms计算出错，帮看看什么原因</title>
      <link>http://www.chinavib.com/forum.php?mod=viewthread&amp;tid=112118</link>
      <description><![CDATA[我计算的是顺态边界元]]></description>
      <category>声学基础及其分析软件</category>
      <author>2099333666</author>
      <pubDate>Thu, 17 May 2012 08:28:29 +0000</pubDate>
    </item>
  </channel>
</rss>
